BedTech BT2000 remote
Find the full model and part number, then check for a documented replacement.
The version changes the answer
Use the complete BedTech store SKU and selected radio-type option. The brand page does not establish an electronics OEM or interchangeability between options.
Replacement fit is not confirmed by the family name. Copy the full part number and revision from the remote back, battery compartment or accessible control-box label. If it is unsafe to reach a label, ask for help.
Do not assume one version replaces another. Read the original label before choosing a record. A revision has not been selected for you.
Label numbers that distinguish these versions
- RM BT2000 BT — revision: Bluetooth; part number: RM BT2000 BT
- RM BT2000 RF — revision: Radio Frequency; part number: RM BT2000 RF
For support, record the complete remote and control-box labels, base model, revision and observed symptom. Ask the manufacturer to confirm a directed replacement and any pairing or feature limitations in writing.
buttonsFoot up/down
buttonsPreset and
feature buttonsNeutral illustration · layouts vary
- OEM
- Not confirmed by the cited brand documentation
- Model family
- BT2000 remote
- Known store SKUs
- RM BT2000 BT, RM BT2000 RF
- Type
- Adjustable bed remote
- Typical use
- Identify your exact system before replacement
- Evidence level
- See the source for each claim below
BT2000 remote: compare the full SKU with the correct manual
BedTech lists BT2000 Bluetooth and Radio Frequency options separately. Its owner’s manual adds a model-specific reference for BT2000LP. Keep the LP document scope separate from the store SKU when identifying your remote.
- Store SKU · Bluetooth
- RM BT2000 BT
Identifier reference - Store SKU · Radio Frequency
- RM BT2000 RF
Identifier reference
Find the BT2000LP illustration, not a neighboring model
In the official BT2000/2500/3000 manual, open PDF page 11 (printed page 08) for BT2000LP Remote Control Instructions. The matching electronics overview is printed page 04. Keep the LP suffix in your support request.
The BT2000LP diagram identifies separate head and foot controls, Flat, a memory position and a flashlight. Use those labels to locate the right manual section; a similar button layout is not a part-number match.
Source and scopeTwo source options; no documented conversion
RM BT2000 BT is paired with Bluetooth in the supplier data; RM BT2000 RF is paired with Radio Frequency. Retain the complete SKU and its option. The two entries do not establish a BT-to-RF conversion, an electronics OEM, or a match based on appearance.
Source and scopeA BT2000LP manual is not a radio conversion guide
The owner’s manual covers three LP models, with different remote diagrams. It does not establish that a BT2500 or BT3000 remote replaces a BT2000 remote. A shared manual download or a matching control-box year is insufficient to select the radio option.
Source and scopeYour next step
- Compare your remote’s labels with the BT2000LP section; record a different model or suffix rather than forcing a match.
- Photograph the full remote label and accessible base/control-box labels. Ask BedTech whether RM BT2000 BT or RM BT2000 RF applies to those identifiers.
- Request the exact ordering identifier and any receiver or revision conditions before ordering.
These notes help identify the part. They do not verify a replacement or add a purchase recommendation. How we assess evidence
Check for a documented replacement
Not sure? See our identification guide| Recorded identifier | Replacement | Status | Notes |
|---|---|---|---|
| RM BT2000 BT | Check this exact part | Verify first | Confirm part number, revision, and control box. |
| RM BT2000 RF | Check this exact part | Verify first | Confirm part number, revision, and control box. |
The family name alone won’t confirm a fit. Open the Finder to check the full part number and required conditions.
Related system information
BedTech systems
Find label information for this manufacturer or brand.
Check the system match
No base or control-box pairing is implied by this family page.
Check your exact base
Use the brand and model printed on its label.
How to identify this remote
Use the complete BedTech store SKU and selected radio-type option. The brand page does not establish an electronics OEM or interchangeability between options.
On the remote
Look on the back of your remote for a model number, FCC ID, or part number.
BACK OF REMOTEModel numberPart no. / FCC IDInside the battery cover
Some model numbers are printed inside the battery compartment.
INSIDE BATTERY COVERModel numberPart no. / FCC IDUnder the bed base
Look for a label on the control box or frame, usually near the head section.
