BedTech BTHU remote
Find the full model and part number, then check for a documented replacement.
Identify the exact part before replacing it
Use the complete BedTech store SKU and selected radio-type option. The brand page does not establish an electronics OEM or interchangeability between options.
Replacement fit is not confirmed by the family name. Copy the full part number and revision from the remote back, battery compartment or accessible control-box label. If it is unsafe to reach a label, ask for help.
For support, record the complete remote and control-box labels, base model, revision and observed symptom. Ask the manufacturer to confirm a directed replacement and any pairing or feature limitations in writing.
buttonsFoot up/down
buttonsPreset and
feature buttonsNeutral illustration · layouts vary
- OEM
- Not confirmed by the cited brand documentation
- Model family
- BTHU remote
- Known store SKUs
- RM BTHU
- Type
- Adjustable bed remote
- Typical use
- Identify your exact system before replacement
- Evidence level
- See the source for each claim below
BTHU remote: identify the store option and the manual scope
Keep BTHU’s wired hand control separate from its control box and power supply. BedTech’s manual supplies a concrete reference for the two-button remote, while the store keeps its own SKU.
- Official store SKU
- RM BTHU
Identifier reference - Store option
- Wired
Identifier reference - Manual reference
- PDF page 8, printed page 06
Identifier reference
Use the BTHU manual’s identification diagram
The BTHU manual’s remote diagram shows a cable and two head-control arrows. Its electronics overview is PDF page 6 (printed page 04), which distinguishes the hand control from the motor and power-supply connections.
Source and scopeWhat still needs the original labels
The wired store option and the diagram are identification references. They do not establish the connector configuration or select one of the separate BTHU control-box manufacturing periods. Do not add a BT or RF suffix to RM BTHU.
Source and scope Source and scope 2Your next step
- Keep the complete RM BTHU identifier without adding or dropping a suffix.
- Photograph the remote label and accessible base/control-unit labels; do not enter a moving mechanism.
- Ask BedTech to confirm the exact ordering identifier and receiver/connector conditions for those labels.
These notes help identify the part. They do not verify a replacement or add a purchase recommendation. How we assess evidence
Check for a documented replacement
Not sure? See our identification guide| Recorded identifier | Replacement | Status | Notes |
|---|---|---|---|
| RM BTHU | Check this exact part | Verify first | Confirm part number, revision, and control box. |
The family name alone won’t confirm a fit. Open the Finder to check the full part number and required conditions.
Related system information
BedTech systems
Find label information for this manufacturer or brand.
Check the system match
No base or control-box pairing is implied by this family page.
Check your exact base
Use the brand and model printed on its label.
How to identify this remote
Use the complete BedTech store SKU and selected radio-type option. The brand page does not establish an electronics OEM or interchangeability between options.
On the remote
Look on the back of your remote for a model number, FCC ID, or part number.
BACK OF REMOTEModel numberPart no. / FCC IDInside the battery cover
Some model numbers are printed inside the battery compartment.
INSIDE BATTERY COVERModel numberPart no. / FCC IDUnder the bed base
Look for a label on the control box or frame, usually near the head section.
